***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69170.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:20:04' / start Universal time ENDTIME = '23:20:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0.10 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT inboard focus,no order sep filter used COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 16.4 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 9.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69171.fts' / File name OBJECT = 'HD172167' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:23:33' / start Universal time ENDTIME = '23:23:53' / End time of exposure RA = '18:33:33' / Right Ascension, hh:mm:ss DEC = '38:41:26' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 20 / Exposure time in seconds EXPCOUNT= 12384 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT seeing 10 secs. COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 16.2 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 9.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69172.fts' / File name OBJECT = 'HD172167' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:25:22' / start Universal time ENDTIME = '23:25:43' / End time of exposure RA = '18:33:33' / Right Ascension, hh:mm:ss DEC = '38:41:26' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 21 / Exposure time in seconds EXPCOUNT= 16811 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT 2nd exp COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 16.2 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 9.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69173.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:26:35' / start Universal time ENDTIME = '23:26:35' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 16.2 / temperature: deg C, CE200 box TEMP-HRK= 12.0 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 9.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69174.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:30:49' / start Universal time ENDTIME = '23:31:00' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 16.1 / temperature: deg C, CE200 box TEMP-HRK= 11.8 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69175.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:34:57' / start Universal time ENDTIME = '23:35:29' / End time of exposure RA = '03:51:53' / Right Ascension, hh:mm:ss DEC = '-10:31:43' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 16.0 / temperature: deg C, CE200 box TEMP-HRK= 11.5 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69176.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:37:50' / start Universal time ENDTIME = '23:38:22' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.9 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69177.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:38:31' / start Universal time ENDTIME = '23:39:03' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.7 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69178.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:39:12' / start Universal time ENDTIME = '23:39:44' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.9 / temperature: deg C, CE200 box TEMP-HRK= 11.5 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69179.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:39:53' / start Universal time ENDTIME = '23:40:25' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.8 / temperature: deg C, CE200 box TEMP-HRK= 11.3 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69180.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:40:33' / start Universal time ENDTIME = '23:41:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.9 / temperature: deg C, CE200 box TEMP-HRK= 11.5 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69181.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:41:14' / start Universal time ENDTIME = '23:41:47' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.7 / temperature: deg C, CE200 box TEMP-HRK= 11.2 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69182.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:41:55' / start Universal time ENDTIME = '23:42:28' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.7 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69183.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:42:36' / start Universal time ENDTIME = '23:43:09' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 25.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.8 / temperature: deg C, CE200 box TEMP-HRK= 11.2 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69184.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:46:20' / start Universal time ENDTIME = '23:46:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.7 / temperature: deg C, CE200 box TEMP-HRK= 11.2 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'CC69185.fts' / File name OBJECT = 'ci 22 pcol' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Vnk/Kss]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '23:51:18' / start Universal time ENDTIME = '00:21:43' / End time of exposure RA = '19:40:48' / Right Ascension, hh:mm:ss DEC = '29:01:23' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1825 / Exposure time in seconds EXPCOUNT= 4142 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2717 / telescope focus FOCUSSP = 5.05 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT seeing 3-6 sec,faint because of BG39 filter COMMENT ccd temp @23:00 UT -100.4 C COMMENT BG39 order sep used for stellar and sources. 2nd order experiment INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 6.6 / temperature: deg C, pri cast TEMP-SEC= 10.8 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 15.3 / temperature: deg C, CE200 box TEMP-HRK= 10.7 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï