***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000262.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '03:13:54' / start Universal time ENDTIME = '03:14:13' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2164 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 13.3 / temperature: deg C, pri cast TEMP-SEC= 11.1 / temperature: deg C, sec air TEMP-PRI= 12.4 / temperature: deg C, pri air TEMP-CON= 17.8 / temperature: deg C, CE200 box TEMP-HRK= 13.3 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.4 / temperature: deg C, Eche, position1 TEMP-EC2= 16.4 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000263.FTS' / File name OBJECT = 'HD118022' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '03:16:03' / start Universal time ENDTIME = '03:47:44' / End time of exposure RA = '13:29:04' / Right Ascension, hh:mm:ss DEC = '04:10:21' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1901 / Exposure time in seconds EXPCOUNT= 591 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2164 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT 1 sec seeing;but some cloud COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 13.3 / temperature: deg C, pri cast TEMP-SEC= 11.1 / temperature: deg C, sec air TEMP-PRI= 12.4 / temperature: deg C, pri air TEMP-CON= 17.7 / temperature: deg C, CE200 box TEMP-HRK= 13.3 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.3 / temperature: deg C, Eche, position1 TEMP-EC2= 16.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000264.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '03:48:32' / start Universal time ENDTIME = '03:48:53' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2164 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 13.3 / temperature: deg C, pri cast TEMP-SEC= 11.1 / temperature: deg C, sec air TEMP-PRI= 12.4 / temperature: deg C, pri air TEMP-CON= 17.2 / temperature: deg C, CE200 box TEMP-HRK= 12.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.2 / temperature: deg C, Eche, position1 TEMP-EC2= 16.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000265.FTS' / File name OBJECT = 'HD118022' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '03:49:42' / start Universal time ENDTIME = '04:22:44' / End time of exposure RA = '13:29:04' / Right Ascension, hh:mm:ss DEC = '04:10:21' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1982 / Exposure time in seconds EXPCOUNT= 602 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2164 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 13.3 / temperature: deg C, pri cast TEMP-SEC= 11.1 / temperature: deg C, sec air TEMP-PRI= 12.4 / temperature: deg C, pri air TEMP-CON= 17.1 / temperature: deg C, CE200 box TEMP-HRK= 12.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.1 / temperature: deg C, Eche, position1 TEMP-EC2= 16.0 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END