***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68858.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:09:55' / start Universal time ENDTIME = '04:10:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.6 / temperature: deg C, pri cast TEMP-SEC= 7.4 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68859.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:10:44' / start Universal time ENDTIME = '04:10:44' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.6 / temperature: deg C, pri cast TEMP-SEC= 7.4 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68860.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:15:10' / start Universal time ENDTIME = '04:15:21' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.6 / temperature: deg C, pri cast TEMP-SEC= 7.4 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68861.fts' / File name OBJECT = 'HD16895 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:16:50' / start Universal time ENDTIME = '04:17:02' / End time of exposure RA = '2:37:22 ' / Right Ascension, hh:mm:ss DEC = '48:48:20' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 12 / Exposure time in seconds EXPCOUNT= 6838 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.6 / temperature: deg C, pri cast TEMP-SEC= 7.4 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68862.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:31:04' / start Universal time ENDTIME = '04:31:15' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.6 / temperature: deg C, pri cast TEMP-SEC= 7.4 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.0 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68863.fts' / File name OBJECT = 'HD1326 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:32:28' / start Universal time ENDTIME = '04:33:45' / End time of exposure RA = '0:12:42 ' / Right Ascension, hh:mm:ss DEC = '43:27:00' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 77 / Exposure time in seconds EXPCOUNT= 3398 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT sp std M2.5 V COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.4 / temperature: deg C, pri cast TEMP-SEC= 7.2 / temperature: deg C, sec air TEMP-PRI= 7.4 / temperature: deg C, pri air TEMP-CON= 13.9 / temperature: deg C, CE200 box TEMP-HRK= 9.7 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68864.fts' / File name OBJECT = 'HD1326 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:35:41' / start Universal time ENDTIME = '04:36:51' / End time of exposure RA = '0:12:42 ' / Right Ascension, hh:mm:ss DEC = '43:27:00' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 70 / Exposure time in seconds EXPCOUNT= 2790 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT cloud at end COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.4 / temperature: deg C, pri cast TEMP-SEC= 7.2 / temperature: deg C, sec air TEMP-PRI= 7.4 / temperature: deg C, pri air TEMP-CON= 14.0 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68865.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '04:37:59' / start Universal time ENDTIME = '04:38:10' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @02:10UT -101.4C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.4 / temperature: deg C, pri cast TEMP-SEC= 7.2 / temperature: deg C, sec air TEMP-PRI= 7.4 / temperature: deg C, pri air TEMP-CON= 14.0 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= 9.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï